JAI BB-500 CL User Manual Download Page 35 | Manualshive

Page: 35 / 47

background image

BM-500CL / BB-500CL

- 33 -

8.

Camera Control Tool for BM-500CL / BB-500CL

The Camera Control Tool for Windows 2000/XP can be downloaded from

www.jai.com

.

The control tool contains a camera control program and a developer's kit for integrating the
control tool in your own software. For the integrator and experienced user, the Camera Control
Toll is much more than a program with a window interface. It also provides an easy and efficient
ActiveX interface built for MS Windows 2000/XP. The OCX interface has the ability to connect to
the camera using the serial interface of the PC by reading and writing properties for the camera.
This integration requires simple programming skills within Visual Basic, Visual C++ or similar
languages in a Microsoft Windows environment.

8.1.

Camera Control Tool Interface

The Camera Control Tool Software is based on a main Tool Bar and a number of associated Tool
Windows. Each button in the Tool Bar pops up a separate Tool Window when pressed. The layout
of the program can be adjusted by arranging the windows the way it is preferred. The program
will store this information and recreate this layout, when the program is restarted. All Camera
Control Tools have a Communication Window and an About Window. The other window(s) contains
camera control commands.

8.1.1.

Camera Control Tool Bar

This is a Camera Control Tool Bar and when the button of each widow, each control GUI can be
initiated.

8.2.

The About Window

The about window contains a picture of the
camera and information about the version of
the program, Internet connection to JAI A/S
and access to the help documents.

The drop-down box labelled "Help File" will
list all files which have the extension .pdf and
that are found in the program (default) folder.

It is possible to download updated operation manuals from the jai website:

http://www.jai.com

An updated manual can be saved in the folder address mentioned above and it will automatically
be included in the list of help files.

About Window

Communication Window

Look Up Table Window
Control Window

Camera Control Window

«
...
33
34
35
36
37
...
»

Summary of Contents for BB-500 CL
















































Reviews:

No comments

Related manuals for BB-500 CL

Brand: Canon Pages: 2

EOS 5D Mark III

Brand: Canon Pages: 19

Brand: Canon Pages: 22

Brand: Canon Pages: 2

EOS 1D Mark III

Brand: Canon Pages: 6

Brand: Canon Pages: 458

EOS 10D Digital

Brand: Canon Pages: 12

EOS 10D Digital

Brand: Canon Pages: 32

EOS 10D Digital

Brand: Canon Pages: 182

Digital IXUS I5

Brand: Canon Pages: 2

Digital IXUS 950 IS

Brand: Canon Pages: 37

Digital IXUS I5

Brand: Canon Pages: 160

Brand: Canon Pages: 388

Digital IXUS 900 TI

Brand: Canon Pages: 2

DIGITAL IXUS 70

Brand: Canon Pages: 2

Digital IXUS 60

Brand: Canon Pages: 2

Brand: Canon Pages: 76

Brand: Canon Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands