![background image](http://html1.mh-extra.com/html/jai/ab-1600cl/ab-1600cl_user-manual_631442027.webp)
AM-1600CL / AB-1600CL
- 27 -
7.
Configuring the Camera
7.1.
DIP switch SW700
SW1 provides Enable/Disable 75 ohm termination for the trigger input, which is pin 10 on the
HIROSE connecter.
This switch is located on the inside of the rear panel.
DIPSW
N
O
Function ON
OFF
External trigger termination
75
Ω
TTL
The factory default is OFF (TTL).
Fig. 22. DIP switch location
7.2.
Register based command control
All configuration of the AM-1600CL / AB-1600CL camera is done via serial communication in the
Camera Link connector. The camera can be set up from a PC running terminal emulator software,
or using JAI's camera control software.
The following pages contain a description of the register-based command protocol used in the AM-
1600CL and AB-1600CL.
Summary of Contents for AB-1600CL
Page 28: ...AM 1600CL AB 1600CL 28...
Page 60: ...AM 1600CL AB 1600CL 60...
Page 61: ...AM 1600CL AB 1600CL 61...