background image

23

GLOSSARY

CDMA

- Code Division Multiple Access is a competing cell 

phone service technology to GSM, which is the world’s most 

widely used cell phone standard. Sprint, Verizon, and Virgin 

Mobile use CDMA.

GPRS

- General Packet Radio Service was early technology 

to enable data communication on GSM networks. It has since 

been replaced by better data technologies such as EDGE and 

3G. It is based on GSM and compliments SMS.

GSM

-

 Global System for Mobile communications. Cell phones 

use a cellular provider’s GSM network by searching for cellular 

phone towers in the nearby area. GSM has more complete 

global coverage due to roaming and international roaming 

contracts. AT&T and T-Mobile use GSM.

MMS

- Multimedia Messaging Service. Takes SMS text 

messaging a step further by allowing for longer lengths beyond 

the traditional 160-character SMS limit.

PIR

- Passive Infrared. A PIR sensor does NOT detect or 

measure “heat”. It detects the infrared radiation emitted from 

an object to detect motion. It triggers the camera to take a 

photo or video when an object passes in front of the sensor.

SIM

- Subscriber Identity Module. A small card used in GSM 

devices to identify your account to the cellular carrier. Users 

may change SIM cards between cameras and the phone 

number and data plans transfer with it.

SMS

- Short Message Service. SMS is also often referred to 

as texting, sending text messages or text messaging. The 

service allows for short messages to be sent from one cellular 

device to another cellular device or from the Internet to a 

cellular device.

SMTP

- Simple Mail Transfer Protocol is an internet standard 

for electronic mail (e-mail) transmission across Internet 

Protocol (IP) networks. SMTP was first defined by RFC 821 

(1982, eventually declared STD 10) and last updated by RFC 

5321 (2008) which includes the Extended SMTP (ESMTP) 

additions and is the protocol in widespread use today.

Summary of Contents for M.I.N.E. CAM

























Reviews: