Jaga STRADA HYBRID, Installation And Operation Manual

Page: 39 / 44

39
EN
MODE MODE
Standby
MODE
MODE MODE
MODE
MODE
Speed 1
MODE MODE
Speed 2 Speed 3
Tw > 280C Tw < 240C
The unit is in standby. The unit automatically starts a new cycle as soon as the set temperature
has been reached.
Permanently off All functions are disabled until the user switches on the unit via the control panel.
- - 3 speeds . Activator speed is set according to the unit’s length.
Control panel operation :
–
Mode and activator speed : Hold down [ Mode ] for 10 seconds until all red LEDs are on.
– Permanently off : Hold down [ Mode ] until all red LEDs are off.
MODE MODE
±10 sec
MODE MODE MODE MODE
±10 sec
Blue LEDs are flashing in the set mode: the water temperature of the supplied water is too high. (Tw > 24 ̊C).
Red LEDs are flashing in the set mode: the water temperature of the supplied water is too low. (Tw < 28 ̊C).
MODE MODE MODE MODE MODE MODE MODE MODE MODE
The LEDs are blinking in a pattern and in the color that matches the selected mode
Only if the window contact is connecrted and switched on : The window contact is open .
MODE MODE
MODE
3.2. CONTROL PANEL ERROR CODES
LED flashes rapidly in the color of the set mode .
Error sensor [3] - Check the water temperature sensor
Error sensor [4] - Check the room temperature sensor