Jaga STRADA HYBRID, Installation And Operation Manual

Page: 41 / 44

41
EN
4.2. SETTING FANSPEED
1. Put the device in the mode that you want to adjust : Cooling / breeze / Heating
2. Put the device in the speed that you want to adjust : Speed 1 / Speed 2 / Speed 3
3. Hold down [ Mode ] and [ - ] simultaneously until the first 4 LED’s are flashing .
Default factory setting of the activator speed is selected depending on the device’s length in order to guarantee the sound levels. .
5. The device returns to the selected mode. (±30sec).
4. Short press [ - ] or [ + ] to adjust the set speed .
MODE
15 sec
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
50%
65%
80%
55%
70%
85%
60%
75%
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
90%
105%
120%
95%
110%
100%
115%
4.3. FACTORY RESET
1. Disable power charge .
1
-
2. Press and hold down both the [-] and [+] button on the circuit board
and switch on the power again. The blue LED will light up, followed
by the green LED 2 seconds later and the red LED 4 seconds late r .
Release the buttons as soon as all 3 LEDs are flashing .
3. The controller will return to the Factory settings, all LEDs will flash for 10 seconds. The controller
will return to the Factory Default settings, all LEDs will flash for 8 seconds .