Jaga DBH 10, Manual

Page: 33 / 36

EN
33
JAGA N.V. | DBH SET - ACO | MANUEL | 2021.02.16 | V.01
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
50%
65%
80%
55%
70%
85%
60%
75%
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
90%
105%
120%
95%
110%
100%
115%
5.2. SETTING FANSPEED
1. Select the mode that you want to adjust: Cooling / breeze / Heating
2. Select the speed that you want to adjust:
3. Hold down [Mode] and [-] simultaneously until the first 4 LED’s are flashing.
5. After 30 seconds, the new settings are automatically saved and the device returns to the selected
mode..
Default factory setting of the fan speed is selected depending on the device’s length in order to guarantee the sound levels..
MODE
15 sec
4. Short press [-] or [+] to adjust the preset speed.
-
10 sec
- +
6. FACTORY RESET
1. Disable power charge.
2. Press and hold down both the [-] and [+] button on the circuit board
and switch on the power again. The blue LED will light up, followed
by the green LED 2 seconds later and the red LED 4 seconds later.
Release the buttons as soon as all 3 LEDs are flashing.
3. The controller will return to the Factory Default settings, all LEDs will flash for 8 seconds.