50
JAGA NV | BRIZA 1 2 - PLUG & PLAY | MANUAL | 2021 .09.28 | V.3
The casing can now be removed in its entirety
Mark the drill holes. Place the device in the correct position. The
type of wall determines which type of screw or plug must be used.
Take the indicated free space around t
he
device into account
Remove the screws at the top and bottom of the unit.
Remove the grille
04
03
02
01
4. INSTALLATION
Connect the device to the hydraulic system by using the specified inlet/ outlet connections. Make sure that the connections are air tight,
use a sealant for this. The coil is equipped with a de-aerater.
If the unit is used for cooling, the hydraulic pipes must be insulated.
When using devices for cooling: iron couplings prohibited.
05
Use a back-off wrench when faste-
ning the hydronic connections !
Remove plug at hydraulic con-
nection.
Summary of Contents for BRIZA 12 PLUG & PLAY
Page 1: ...BRIZA 12 PLUG PLAY MANU L ANLEITUNG MANUAL...
Page 59: ...NOTA...
