Jaga BRIZA 12 - JFCC, Manual

Page: 48 / 56

48
– switch the thermostat off with the “ “ button
– To go to the menu, press the “M” and “+” buttons simultaneously for 10 sec. until “ ” appears. Adjust
the settings with the “+” or “-“ buttons.
– scroll through the menu with the “M” button.
MENU DESCRIPTION ADJUSTABLE
01 Temp. Offset -8°C . +8°C (+0,5°C)
04 Maximum temperature +10 °C . +40°C (+0,5°C)
05 Minimum temperature +10 °C . +40°C (+0,5°C)
06 Display mode Room / Set / Room set
07 Frost protection +10 °C . +20°C (+0,5°C)
11 Dead Band 0°C . +3°C (+0,5°C)
12 Display mode Room / floor / Room vloer
13 2-pipes/4-pipes select ‘2’: 2-pipe connection / ‘4’: 4-pipe connection
14 (0-10V) select dead band or not ‘0’: With dead band / ‘1’: Without dead band
15 Reboot memory ‘OF’: do not save / ‘LA’: save
16 Mode
Heating / Cooling / Heating + Cooling / Auto select
( 4-pipe only )
17 Fanspeed 80% - 90% - 100% / Auto mode
18 Maximum fan speed 80% . 100%
19 Medium fan speed 45% . 75%
20 Low fan speed 20% . 40%
21 Factory reset
rE
After selecting “rE”, press the ““ button to go to the
startup window. Recovery was successful.
10dA Software version 10dA - Version 21
Parameter settings