7
8
⑤
Put the filter without plastic film back into
the machine.
⑥
Put the filter mesh cover back.
Getting Started
③
The display screen lights up and touches a relevant
function button to enter the working state.
①
Insert the power plug to make the machine powered
on, and the buzzer makes a “ding” sound.
②
Power on by touching the power key.
Operating Instruction
The “ ” switches the air purifier system on and off.
When the system is switched off, the fan stops to run,
but the system will remain connected to the power
supply (standby mode). The indicator light of the
“ ” is red, and it is white when it is working.
Touch the “ ” in the working state, the key will light
up (full light), each time you press it, the comprehensive
display area of the display will switch between PM2.5
/PM1.0/PM10.If there is no button action within 3 seconds,
the switch button light is off (half bright), and the display
returns to displaying PM2.5.
On/off button
Touch the “ ” in the working state, and the indicator
light of the button will light up. Every time you touch
the “ ”, the gear will change by 1. The gears cycle
between 1-5 gears.
When adjusting the wind speed, the comprehensive
display area on the display will show the wind speed
gear.
Fan speed button
Touch the “ ” in the working state to enter the sleep
mode. In the sleep mode, except for the sleep button
indicator light and the sleep icon on the display screen,
all other button indicator lights and icons are off.
The wind speed is running at gear 1, and the sleep
button indicator light and the sleep icon on the display
will go out after 10 seconds.
In sleep mode, touch any function key once to wake
up the screen, and the sleep key indicator and sleep
icon will light up. Touch any key again to exit sleep
mode and return to previous setting mode.
In the working state, press and hold the “ ” for more
than 3 seconds to enter the off-screen mode, and
all LED indicators go out. The motor runs at the currently
set speed. Press any key to exit the off-screen mode,
and the display will resume the display of the current
machine working status.
Sleep button
In the working state, long press the “ ” (more than
3 seconds), the child lock function is turned on, the
indicator light of the child lock button is on (full light),
and the child lock icon on the display is on.
When the child lock function is turned on, the functions
of touching other touch keys are invalid.Long press
the “ ” again (more than 3 seconds), the child lock
function is turned off, the child lock button indicator
light is half bright, and other function buttons resume
their functions.
Child lock button
Timing shutdown:
touch the “ ” in the working state, the indicator
light of the timing button is on (full light), and it
enters the setting state of timing shutdown. The
timing icon on the display screen lights up, and the
comprehensive display area displays the set time,
and the time unit is hours.
Every time you touch the “ ”, the value will increase
by 1, and the timing value will cycle between 0 and
24. Stop touching the "timing button", the timer
shutdown setting is completed, and the set shutdown
time will start counting down.
Timing start:
In the standby state, touch the “ ”, the indicator
light of the timing key is on (full light), the timing
icon on the display is lit, and it enters the setting
state of timing power-on.
The comprehensive display area displays the set
time, each time you touch the “ ”, the value
increases by 1, and the timing value cycles between
0 and 24, and the time unit is hours.
Timer button
Touch the “ ” in the working state, the working mode
is switched between automatic and manual. In the
automatic mode, the indicator lights of the automatic
keys are on, the indicator lights of other function keys
are dark, and the automatic icon on the display is lit.
In automatic mode, the wind speed changes according
to the value of PM2.5, and the color of the air quality
indicator changes according to the value of PM2.5.
(the corresponding relation is shown in the following
figure).
Auto button
0-12
PM2.5 value
Wind speed
gear
Air quality
Excellent
Green
Blue
Yellow
Red
Good
Severe
Poor
PM2.5 air quality
indicator
13-35
36-55
＞55
In the power-on state: long press the “ ” for 3 seconds,
the WIFI Key indicator light is on and and the WIFI icon
on the display screen flashes, indicating that it is waiting
to connect to the network. After successfully connecting
to the network, the WIFI icon on the display is always
on, and the button indicator light is always on.
If the connection fails within 10 minutes, the WIFI icon
goes out and the button indicator light is dark. Every
time the power is turned on, the WIFI button lights up
and flashes in the power-on state, and the WIFI icon
flashes, waiting for network distribution. If there is a
distribution network before, it will automatically connect
to the mobile phone with the previous distribution network.
After the connection is successful, the WIFI button and
WIFI icon are always on.
The filter life is defined as 3000 hours (at 4 wind speeds),
the filter life is displayed as a percentage, and the full
life is 100%.
Filter Life Check:
Press the “ ”, the comprehensive indicator area will
display the percentage of the remaining filter life.
Filter Life Reset:
Filter life <5%, the filter button flashes red. Remind the
user to replace the filter. Press the “ ” more than 3s,
and the filter life will display 100%.
When the life of the filter is ≥5%, long press the “ ”
cannot reset the life of the filter, only a "ding" sound will
be issued.
Force Filter Life Reset:
Within 30s of power-on, press and hold the “ ” + “ ”
(more than 3s) at the same time in standby mode, and
the life of the filter will be reset, with a "ding" sound,
the screen flashes (0.5 seconds/time) 6 times, indicating
that the filter life clearing action is completed, press
the filter life key to check, and the filter life recovery
display is 100%.
WiFi button
Filter reset button
PM1.0/PM2.5/PM10 AQI
Using Your Air Purifier
