30
Note
The water-resistance function of the compression key is separate from the
operation of the crown itself. Even in “closed” position, the key does not lock the
crown. It is therefore possible, in practice, to handle the crown when the key is
in the compressed seal position. However, as mentioned earlier, it is extremely
inadvisable to make adjustments in this position, since this might damage the
seals. We recommend that you first turn the compression key to the “open”
position before performing any adjustments on your watch.
Adjusting the clasp
The clasp of your watch is fi tted with a length-change system enabling you
to lengthen or shor ten your bracelet by 4 mm on each side, for enhanced
wearer comfor t.
Using the fine adjustment system
Transition from the long position to the shor t position:
Remove your watch.
Hold your clasp open between the thumb and forefinger of one hand, with
the bracelet section in your other hand (fig. 1).
Fig. 1
