background image

11

TEST INSTALLED FITTING AND
CONNECTIONS FOR LEAKS

With FAUCET HANDLES in OFF position, turn on
WATER SUPPLIES 

(1)

 and check all connections

for leaks.

Operate both handles to flush water lines thoroughly.
Turn diverter to rim wash and bidet spray.

Operate LIFT ROD 

(2)

 and fill  bidet with water. DRAIN

STOPPER 

(3)

 should make a good seal and retain water

in bidet. If DRAIN STOPPER 

(3)

 does not make a water

tight seal see “Troublingshooting Guid” section in
these instructions 

Release DRAIN STOPPER 

(3)

 and check all drain

connections and "P" trap for leaks.     Tighten if
necessary.

12

HELPFUL HINTS FOR CLEANING AND MAINTENANCE

The solid brass product you have just purchased has been designed to give you years of beauty and service. It is
important to bring to your attention proper care and maintenance procedures, which will ensure its lasting beauty.

First and foremost, it is important (as it is with any fine piece of jewelry or furniture) that the product be wiped clean and
dry with a soft damp cloth after every use.

Second, under no circumstances should an abrasive cleaner or combination cleaner/polish be used on JADO products.
The abrasive nature of such products will eventually destroy the finish and void the warranty.

In the event of stubborn blemishes shown on the finish, we recommend use of Windex window cleaner with a soft cloth,
but we do not recommend it be used on an everyday basis.
It is important to note that it is normal to expect signs of usage over time.

Thank you for selecting JADO for your home.

JAD

O

JAD

O

1

1

3

TO THE PURCHASER OF JADO BRASS PRODUCTS

Attention installer:

Please leave This Pamphlet for The Owner

POLISHED BRASS AND CUSTOM FINISH WARRANTY

: A 1 YEAR LIMITED FINISH WARRANTY from date of purchase is provided to the

first residential owner against defects in materials and workmanship.  Due to the ever-changing finish of Patina products, the finish warranty
is excluded.  Warranty shall not include problems related to the installation of the product.

MECHANICS
MECHANICAL WARRANTY: 

A LIFETIME LIMITED WARRANTY is provided to the first residential owner on parts to be free from failure

related to defects in materials and workmanship but not installation.

CONDITIONS TO WARRANTIES

JADO Bathroom & Hardware Manufacturing Corp. places the following conditions on its finish and mechanical warranties to the first residential owner only.
JADO finish and mechanical warranties are limited to products correctly installed and used in a residential environment.
JADO warranties will not assume liability for damage due to abuse, mishandling, incorrect installation, improper maintenance, or deterioration
due to normal use.
JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products.
In the  event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased
along with proof of purchase.
JADO's obligation under the warranty shall be limited to the repair or exchange of any product which has been determined by JADO to be
defective after appropriate examination.

The state of California has mandated under Proposition #65 that 
manufactures of products, including faucets which come into 
contact with potable water, must warn the consumer if the product 
contains materials listed by the state as a carcinogen or 
reproductive toxin.  Lead, which is contained in all brass faucets in 
limited amounts appears on the State's list.

Preliminary industry tests have indicated that users of faucets 
made from brass face no significant danger, however,
California Proposition #65 requires that we  provide you with the 
following notice:

NOTICE: JADO products conform to industry 
requirements of water conservation under the 
ASTM / ANSI  A112.18.1-2005  plumbing code.   
Lavatory, bidet, wet bar and kitchen faucet sets 
have a maximum flow rate of 2.2GPM.  Shower 
heads, hand showers and body sprays have a 
maximum flow rate of 2.5GPM.

Warning:  This product contains an element 

known to the State of California to cause cancer

of reproductive harm.

JADO BATHROOM AND HARDWARE MFG. CORP.

6615 West Boston

Chandler, AZ 85226

 

  JADO warrants this product to be free from defects in materials or workmanship for as long as the original consumer purchaser
owns their home.
  JADO will provide, free of charge, at it’s sole option, replacement part(s) or product (or if no longer available, a comparable
product) to replace those which have proven defective in materials or workmanship.
  Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to JADO for all limited
warranty claims. This limited warranty is non transferable. It does not apply in the event of product damage due to the use of other than
genuine JADO replacement parts, installation error, abuse, misuse, or improper care and maintenance (whether performed by
a plumber, contractor, service provider or member of the purchaser’s household). The limited warranty excludes damage due to aggressive
air or water conditions, or harsh or abrasive cleaners and/or materials. This limited warranty excludes all industrial, commercial and business
usage, whose purchasers are hereby extended a two year limited warranty (with the exception of solenoid valves and other electronic
components which carry a one year limited warranty) applying to all other terms of this limited warranty except duration. This limited warranty
does not cover labor charges incurred and/or damages sustained in installation, repair or replacement, nor incidental or consequential
damages, all of which are expressly disclaimed. This limited warranty is applicable only to JADO faucets manufactured after June 1, 1996
and installed in the United States and/or Canada.
  This limited warranty gives the original consumer purchaser of an JADO faucet specific legal rights which may vary from state to
state or from province to province. This limited warranty does not cover any liability for consequential or incidental damages, all of which
are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including
those of merchantability or fitness for an intended purpose. In some states or provinces the exclusion or limitation of incidental or consequential
damages is not allowed, so those exclusions may not apply to you.

JADO Bathroom & Hardware Manufacturing Corp. provides the following warranties only to the first  residential owner of our products.
FINISHES  

  FAUCET LIFETIME FUNCTION AND FINISH LIMITED WARRANTY

NOTE: Diverter valve is not a positive shut-off to rim wash.

H 9 6 5 8 5 1

Three Hole Bidet Set
with Vacuum Breaker

4

2

Summary of Contents for Savina 845/004 Series









Reviews: