JWI-700D/700S 15
7-5 Accumulation, Accumulation Display and Accumulation clear
Accumulation
Under the weighing mode, put the item on the weighing pan. Press key
M+/SAVE
at the
appearance of
“
”
. “
”
is displayed momentarily before the display reverts to the weight
of the item.
Remove the item and the display goes back to zero before the next accumulation can register.
（
The maximum is 99 pieces, display the latest 10 accumulation events in details
）
Accumulation Display
Press key
MR/
to display the accumulation data
MR/
or
TARE/
to check the total accumulation and each accumulation event in detail.
The number of weighments is indicated by Auxiliary display at the left bottom.
XX=Total accumulation
；
XX=certain accumulation
Accumulation Clear
To clear accumulation data (total accumulation data or one of the accumulation events), press
key
M-/SET
while the data is displayed. To exit and return to normal weighing mode press key
ZERO/ESC
.
8. Error message
Error Message
Problem
ERR0
Exceed the zero range
ERR1
Model setting error. Resolution should be within 300-300000
ERR2
Exceed the initial zero point
ERR3
Exceed the A/D resolution range
ERR4
EEPROM failure
ERR5
Overload condition
ERR6
Exceeds the display range
ERR7
Accumulated number of weighments exceeds the display range
ERR8
Lower limit is higher than upper limit
ERR9
Exceed tare or pre-tare range
ERR10
Wrong calibration weights
