JWI-700D/700S 14
rightwards; Press
+
/PRINT/HI
or
-/
H
OLD/
LO
to change the value
3. Press
M-/SET
to enable / disable the check weighing function
4. Press
M+/SAVE
to save the Lower limit and return to weighing mode
Place the sample on the weighing pan, if the sample weight is under the lower weight range while over
20d, the LOW lamp will light up. If the sample is within the lower and upper weight range the OK lamp
will light up. If the sample is over the upper weight range, the HI lamp will light up.
7-4 Simple Counting
1. Press key
UNIT
to select the unit “PCS”.
2. Press key
G/N
,
the ex-factory default sample quantity (10 pcs) is displayed.
3. Use key
+
/PRINT/HI
or
-/
H
OLD/
LO
to choose the sampling amount. Available options
are10
、
20
、
50
、
100
、
200
、
500( pieces)
.
4. Put the corresponding samples on the weighing pan, and then press key
TARE
.
“
”
is displayed momentarily before the display reverts to the sample quantity.
→
5. Remove the samples and put the load on, the scale calculates the amount of the load.
6. To go back to the normal weighing mode, remove the load and press key
UNIT
to select the
proper weighing unit.
Note:
1. The larger the sample size, the more accurate unit weight.
2. Symbol “ ” points at “UW” when calculated unit weight is lower than 4 / 5 of scale division.
