JADEVER
▍
51
Chapter 8: Advanced Applications
Expanding Usage
Material system
------------------------------------------------------------
1.
Install the Inventory Management software on PC, and run the program.
Default Account: 123456, Password: 123456
Press Tools
→Start JDI→Start server→the server starts successfully.
2.
System Setting(See Management Stock Service Manual).
3.
Network connection
（
See chapter 5
）
4.
Press
STOCK
in the JDI main screen, and enter the UserName(123456) ,
Password(123456), and Server IP. Press
ENTER
to connect.
5.
There is message to show the set up status.
System Initialization
------------------------------------------------------------
If there is system failure after update, please initial the parameter.
Press and hold key ZERO while powering on the scale. Do not release it unless
there is a beep sound which means the initialization is finished.
Touch screen adjustment
------------------------------------------------------------
Note: All the setting parameters including accuracy, capacity and
calibration are cleared after initialization.
