background image

INSTALLATION

INSTRUCTIONS

JADE 

SEALED 

GAS COOKTOP

PLEASE READ THIS MANUAL COMPLETELY AND CAREFULLY BEFORE PROCEEDING.

NOTE TO THE INSTALLER: Please leave this manual with the cooktop for the consumer.
NOTE TO THE CONSUMER: Please retain this manual for future reference.

IMPORTANT

The installation of this appliance must conform with local codes or, in the absence of
local codes, with the National Fuel Gas Code ANSI Z223.1 – latest edition. If in-
stalled in Canada, installation must conform with local codes, or with CAN/CGA
B149.1, Natural Gas Installation Code or CAN/CGA B149.2 Propane Gas Installa-
tion Code.
This appliance must be electrically grounded in accordance with local codes or, in
the absence of local codes, with the National Electrical Code, ANSI/NFA 70 – latest
edition. In Canada, it must be electrically grounded in accordance with local codes
or with CSA C22.1 Canadian Electrical Code Part 1.

CONTENTS

Important Safety Instructions ............................................................ 2
Unpacking and Inspection ................................................................. 2
RJCT Model Configuration and Specifications .................................. 3
Clearances from Combustible Surfaces ............................................ 4
Ventilating Hood Recommended Size................................................ 4
Installation Layout ............................................................................. 5
Gas Connection ................................................................................ 6
Electrical Connection ..................................................................... 7-8
Initial Startup and Burner Adjustment ................................................ 9

7355 E. SLAUSON AVENUE, COMMERCE, CALIFORNIA 90040

MADE IN USA

MODELS: RJCT30, RJCT36,

RJCT48, RJCT60

P/N   2400080000     06/03

C

US

Summary of Contents for RJCT30










Reviews: