P/N 24-132 REV A 7/00
Page 7
The Jade Convection Oven described within these instruction sheets under the “Titan
Convection Oven-Gas Controls” can also be equipped with electric ignition.
SERVICE AND MAINTENANCE
Contact the factory, factory representative or a local service company to perform maintenance
and repairs.
For daily cleaning, turn “ON” burner valves on top sections for 2 to 3 minutes and then turn
“OFF.” Use warm water and mild cleanser on fry top plates and open top grates. On hot top
plates, use a rough cloth to clean plates. DO NOT use water to clean hot top plates.
Once a month, clean all burners with water and steel brush ensuring that all burner ports are
free of debris. Clean pilots in same manner. Once cleaned and dried, re-light pilots and check
for blockage. As frequently as necessary, remove grease tray, empty and clean with mild
detergent.
SERVICE INTERVALS
The need for servicing will, to a great extent, be determined by the appliance usage. The
following chart outlines our suggestion for service intervals:
DAYS PER WEEK
SERVICE INTERVALS
Normal Use
(5 Hrs./Day)
Heavy Use
(12 Hrs./Day)
7
60 Days
30 Days
5 to 6
120 Days
60 Days
1 to 4
180 Days
120 Days
It is strongly suggested that a trained gas appliance service company examine the appliance at
least yearly.
REPAIR GUIDELINES
All repair work must be completed by a licensed, trained service person experienced in
commercial gas food service equipment.
If it becomes necessary to replace any gas control device, such as a main burner valve or
thermostat, the replacement part should be ordered from the factory only, unless it has been
determined that the EXACT part is available from your local parts supplier.
CAUTION: Before servicing this appliance, turn OFF gas to the appliance.
