ThingMagic Sargas User Guide
|
36
WARNING -
Antenna detection is currently not supported in Sargas. If no antennas are selected in the
Settings --> Reader screen, no tags will be read.
10.1.5.1
(Gen2) Protocol Settings
The Gen2 Protocol Settings allow for optimization of the Reader's performance based on real world use case
requirements. In addition, for advanced users, direct setting of low level Gen2 protocol parameters are available
using the Customize option of each section.
RF Power Setting
Controls the method used for setting power:
•
Global
- all antennas will use the same power setting, the value of RF Power.
•
Per Antenna
- power for each antenna must be set individually for each and antenna and
both read and write power settings, the value of Antenna # Read Write Power.
Antenna # Read
Power (dBm)
The power setting used for Read operations on antenna #. This setting is only used when RF
Power Setting is set to
Per Antenna
.
Antenna # Write
Power (dBm)
The power setting used for Write operations on antenna #. This setting is only used when RF
Power Setting is set to
Per Antenna
.