ThingMagic Sargas User Guide
|
25
o Trendnet TPE-104GS (802.3af, 5V@2A)
o TP-LINK TL-POE10R (802.3af, 5V@2A)
Contact
for additional information regarding the use of POE adapters.
7.2
Using DHCP
7.2.1.1 Sargas Setup
DHCP addressing can be used with any LAN interface. To enable DHCP, follow these steps:
1. Click on Settings icon at the top of the Web Interface navigation menu to access the Settings Page.
2. Select Use DHCP = Yes radio button under the General Network Settings section of the Settings screen.
3. Click the Save Network Settings button at the bottom of the page.
WARNING -
No changes take effect until you click on the “Save Settings” button at the bottom of any
configuration screen.
7.2.1.2 PC Setup
To use DHCP to automatically assign your PC's IP address to insure common configuration with the Sargas, do
the following:
1. Select Start from the Start bar, and then select Control Panel.
2. Double click the Network Connections icon.
3. Disable your PC's wireless connection, if one exists.
4. Double click the Local Area Connection icon. The local area Connection Status window appears, as shown in
Figure 12.
5. Click the Properties button. The Local Area Connection Properties window appears, as shown in Figure 13.
6. Scroll down to the bottom of the list and select Internet Protocol (TCP/IP).