17
Hydromassage
Caressing water to pamper your body and relax your mind.Excellent
against stress, the hydromassage helps relieve muscle tension and
improves your mood.
A
B
X
Once immersed in the hot tub
, the water level must fully cov-
er the nozzles on the backrest.
X
To activate the function:
- briefly press the “
Pump
”
button (display A) to turn
pump on/off
(the button briefly lights up blue, then returns to
white);
- press the “
Pump
”
button (display B) to turn pump on/off;
The function lasts 20 minutes, but it can be turned off earlier by
pressing the same key again.
NOTE:
if the energy limiter has been activated (see the installa-
tion manual), turning on the hydromassage pump to full speed, will
switch off the heater if it is on.
Q
Suggestions for use
The heart of the hydromassage of the spas is a system of hydrojets.
They are designed to stimulate various parts of the body depending
on where they are positioned. There are soft, gentle jets to enjoy true
relaxation, or more energizing jets to rest and revitalize.
The nozzles offer adjustable levels of inten-
sity, generating a vigorous localised flow,
which creates a spiral of air and water, per-
fect for stimulating average-sized muscle
groups. The jets can be adjusted to high or
low pressure to release tension at pressure
points on your shoulders, neck, back and
calves.
Light
Thanks to the innovative LED digital lighting system, it is possible to
enhance the regenerating effect of the water with an infinite com-
bination of colours, mixed in just as many sequences... and all with
the simple press of a button.
A
B
X
Press the key
“Light”
/
to activate the spotlight lo-
cated on the wall of the tub (the LED comes on).
NOTE:
some models have a white light led spotlight.
X
When switched on, the sequence of colours will be activated
(the LED on the control panel flashes).
X
When the
“Light”
/
button is pressed again, the col-
our sequence is stopped and then a colour is displayed in fixed
mode
(the LED on the control panel stops flashing and turns to
fixed mode)
.
To change colour press the
“Light”
/
button.
alternatively
