26
5-6 cm
on/off
Hydromassage
Turn on the main switch and wait a few seconds until the
start-up process has completed.
To start the hydromassage, press the button located at the
edge of the tank; press it again to turn off the function.
We recommend leaving the hydromassage active for a dura-
tion of 15-20 minutes (5-10 minutes are necessary before the ac-
tion of the moving water begins to take effect).
We recommend setting the water temperature at approxi-
mately 36 °C; in the instance of higher temperatures, it is advis-
able to reduce the duration of the hydromassage:
34-36 °C --> 20 minutes of hydromassage
36-38 °C --> 15 minutes of hydromassage
38-40 °C --> 10 minutes of hydromassage
Suction inlet with safety device
This inlet is equipped with a safety device which blocks the
pump’s suction when the vents in the cover are
blocked. The pump resumes normal operation
once the blockage has been removed.
Soap and bath foams (where not used as part of hydromas-
sage) must only be used when the hydromassage is not in use.
Always turn off the hydromassage and main switch before
emptying the tub.
WARNING! If there is a power outage, turn off the main
switch. This prevents the pump from accidentally
starting again once power has been restored.
3
4
1
2
Summary of Contents for Projecta lagoon 2
