Jacuzzi JAUTP, Installation & Operation Manual

Page: 18 / 28

18
JAUTP / JAUTPS CONTROLLER
7.9 SOLAR PRIORITY (IF APPLICABLE)
iNSTALL SeTTiNgS>SOLAr PriOriTY
NOTE:
You will only see this option if solar heating is
installed in your system.
Enable the system to use solar heat first, when available.
If solar heat is no longer available, the system will
automatically switch to the alternate heat source.
SOLAR PRIORITY
Enable
Disable 
More
INSTALL SETTINGS
Color Lights >
Label Aux >
Temp Calibrate >
Solar Priority >
Assign JVA >
>
• When solar and heater are enabled the solar
will heat the water until either the thermostat
setting has been reached or solar heat is no longer
available.
• If the solar panel is not hot enough, solar heat will
shut off and the other heat source (usually gas
heater) will take over to bring the water up to the
thermostat setting.
7.10 ASSIGN JVA
iNSTALL SeTTiNgS>ASSigN JVA
NOTE:
If the system is a pool/spa combination, with-
out solar, only the solar JVA is assignable. If the
system is a pool or spa only system, without
solar, all three JVAs are assignable. The example
shown is for a pool or spa only system without
solar.
Allow Jandy Valve
®
Actuators (JVAs) to be assigned to
any auxiliary on the JAUTPS/JAUTP controller, so that
when you select this auxiliary, the valve turns. Assigning
JVAs lets the pool owner control certain features
like diverting water to a waterfall or bank of spa jets.
Multiple JVAs can be assigned to one auxiliary without
extra hardware.
ASSIGN JVA
Intake Free
Return Free
Solar Free
ASSIGN JVA
Intake
/Return/Solar
None
Aux1
Aux2
Aux3
More
INSTALL SETTINGS
Color Lights >
Label Aux >
Temp Calibrate >
Solar Priority >
Assign JVA >
>
ASSIGN JVA
Intake Free
Return Free
Solar Free
ASSIGN JVA
Intake
/Return/Solar
None
Aux1
Aux2
Aux3
More
INSTALL SETTINGS
Color Lights >
Label Aux >
Temp Calibrate >
Solar Priority >
Assign JVA >
>
7.11 ASSIGN HOTKEYS
iNSTALL SeTTiNgS>ASSigN HOTKeYS
NOTE: You will only see this option if the AquaPalm™
is installed in your system and is turned on.
Assign buttons 1 and 2 on the AquaPalm hand-
held remote to any piece of equipment con-
nected to a circuit or relay for immediate and
dedicated control of that equipment.
Assign Hotkeys
1 Aux1
2 Aux2
INSTALL SETTINGS
Assign Hotkeys >
Hotkey 1
Aux1
Aux2
Aux3
Filter Pump
Pool Heat
Solar Heat

Assign Hotkeys
1 Aux1
2 Aux2
INSTALL SETTINGS
Assign Hotkeys >
Hotkey 1
Aux1
Aux2
Aux3
Filter Pump
Pool Heat
Solar Heat

Assign Hotkeys
1 Aux1
2 Aux2
INSTALL SETTINGS
Assign Hotkeys >
Hotkey 1
Aux1
Aux2
Aux3
Filter Pump
Pool Heat
Solar Heat
