12
JAUTP / JAUTPS CONTROLLER
6.1
BASIC NAVIGATION
Use the following buttons on the user interface to
access and select all menus and commands:
More
®
On/Off
Turn user interface power on/off.
Up/Down
Scroll up/down within current menu to
More
®
highlight a specific menu command.
More
®
Back
Go back to previous menu. To return to Main
menu, press Back button repeatedly.
More
®
Select
Select current highlighted menu command.
Display the next menu or activate the
selected function.
6.2
SET THE CLOCK
MAiN > SeTTiNgS > CLOCK
Set the current day of the week and time. This setting is
the basis for defining schedules for the filter pump.
SET CLOCK
Monday
1:04AM
Settings
Clock
Schedule
SET CLOCK
Monday
1:04AM
Settings
Clock
Schedule
1.
Highlight CLOCK and press Select twice.
Current programmed day flashes.
2.
Scroll up/down to display desired Day.
Press Select.
3.
Scroll down to display current programmed time. Press
Select.
Current programmed hour flashes.
4.
Scroll up/down to display desired hour.
Press Select.
Current programmed minutes flash.
5.
Scroll up/down to display desired minutes.
Press Select.
6.3
DEFINE EQUIPMENT ON/OFF
SCHEDULES
MAiN > SeTTiNgS > SCHeDuLeS
Define automatic ON and OFF times for equipment.
You may set a total of ten schedules in the system to
define different on/off times for any of the following
equipment:
• Filter Pump
• Variable Speed Pump Preset (if applicable)
• Pool Heater
• Spa Heater (if applicable)
• Solar Heater (if applicable)
• Aux1, Aux2, and Aux3 (as applicable)
6.3.1
DEFINE FILTER PUMP SCHEDULE
MAiN > SeTTiNgS > SCHeDuLeS > FiLTer PuMP
NOTE:
The procedure to define or change ON and
OFF times for all additional equipment is identi-
cal to defining Filter Pump schedule.
SCHEDULE
Filter Pump
No programs
entered
MORE
SCHEDULES
NEW
>
Filter Pump >
Spa
>
Pool Heat
>
Spa Heat
>
Solar Heat
>
SCHEDULE
Filter Pump
No programs
entered
MORE
SCHEDULES
NEW
>
Filter Pump >
Spa
>
Pool Heat
>
Spa Heat
>
Solar Heat
>
1.
Highlight FILTER PUMP and press Select.
No program is currently entered.
2.
Highlight NEW and press Select.
Current ON time is displayed.
3.
Use Up/Down arrow keys to program hours and
minutes for desired ON time.
4.
Repeat the steps to program hour and minutes for OFF
time.
5.
Repeat the steps to program desired DAYS. Default
setting is ALL DAYS.
