Read all instructions before beginning installation.
Room Construction: Important
The room where the shower unit is to be located must be constructed of materials that can withstand excessive amounts
of moisture and condensation. Large amounts of steam can be released into the room when the shower door is opened.
Providing natural or forced ventilation of the room will help maintain comfort and minimize moisture damage to the building.
Jacuzzi Whirlpool Bath is not responsible for damages resulting from excess moisture or water spillage. Consult an architect
or engineer for aid in designing your interior structure. Do not install heat lamps directly above shower unit. The clear
top will deform from excess heat.
Water Supply Required
The water supply must be capable of delivering 3 gallons (11 liters) per minute minimum to the unit within a pressure range
of 20-65 PSI (1.4-4.6 BAR). Pressures in excess of 65 PSI (4.6 BAR) must be reduced with a regulator in the supply line.
This is the amount of water and pressure required to ensure adequate performance of the J-Dream; it is not the water
consumption rate.
Electrical Power Required
See ELECTRICAL REQUIREMENTS for power required. Power supplied to the unit must be through a *GFCI protected,
dedicated circuit with proper bonding and grounding. The GFCI must be located in an area that will allow access for frequent
testing.
Options Available
A pressure balancing valve is available as an option to be added to the hot and cold water supply. Use of this pressure
balancing valve will require different fittings to be provided at the water supply stub out. Consult instructions supplied with
pressure balancing valve before connecting the hot and cold water supply.
Caulking
Select a non-yellowing clear caulk suitable for bathroom use in a steam enviroment. We suggest one of the following:
(a) Red Devil Inc. #0870
(b) Ace Hardware Corp. #17600
* GFCI ( Ground Fault Circuit Interrupter) is also known as an ELCB ( Earth Leakage Circuit Breaker.) This device must be
a type approved by electrical codes and standards to protect users from potential electrical hazards.
Installation & Operating Instructions
(Right Hand & Left Hand Models)
4
