background image

Page 69

J-400 Series

20.11  standard wireless remote Control

(Included With Optional J-1000 Sound System)

• 

Usable range 15' (5m)

• 

Never leave the remote under the s

pa cover for any 

reason.

• 

Battery Replacement: Use Coin Type, CR2025 or 

equivalent.

wireless remote Control Command summary

Button

Operation

Button

Operation

Power

Power Button: On/Off.

1

Intro

Intro/Station 1 Preset Button: 
• 

In CD mode: Provides a 

5 second preview of each 
track. 

• 

In radio mode: Plays 

preset station 1 or press 
and hold for 3 seconds to 
set station 1.

Mute

Mute Button: On/Off.

2

Random

Random/Station 2 Preset 

Button: 

• 

In CD mode: Plays CD 

tracks in a random mode. 

• 

In radio mode: Plays 
preset station 2 or press 
and hold to set station 2.

Source

Source Button: 
Selects Radio, CD 
or iPod/MP3 Player 

function.

3

Repeat

Repeat/Station 3 Preset 

Button: 

• 

In CD mode: Repeats 
same CD track until the 

feature is deactivated.

• 

In radio mode: Plays 

preset station 3 or press 
and hold to set station 3.

Summary of Contents for J - 400 SERIES J - 465














































































Reviews: