J-200 Series
E
Lift unthreaded filter
cartridge from skimmer
well.
F
Rinse debris from fil-
ter cartridge pleats using a
garden hose and high-pres-
sure nozzle. Start at the
top and work downward to
the handle. Repeat until all
pleats are clean
Trapped
Air
Bubbles
Cartridge
G
Submerge filter car-
tridge in spa. Tilt threaded
end upward to remove
trapped air bubbles, then
keep cartridge submerged
to prevent air entrapment
during installation (step H).
(Inside Spa View)
H
Install filter cartridge
back onto wall fitting
by rotating the cartridge
handle clockwise. DO NOT
OVERTIGHTEN!
(Filter Cover Back View)
I
Install clean skimmer
bag back onto the filter
cover clips as shown.
(Inside Spa View)
J
Install filter cover
by sliding it down into
position over mating spa
retainer clips. Turn spa
power back on after skim-
mer cover is installed.
Periodically, the filter cartridge will need a more thorough cleaning to remove
imbedded oils and minerals. For this, we suggest cleaning as illustrated in step
“F”, followed by soaking the filter overnight in a plastic container filled with a
solution of water and specially formulated filter cleanser available from your
authorized Jacuzzi dealer. The average life expectancy of each filter is approxi-
mately two years with proper care and water quality maintenance. Replacement
cartridges may be purchased from your authorized Jacuzzi dealer.
29
