background image

Comfort PLUS Whirlpool Bath

Page 28 

www.jacuzzi.com

 

Installation and Operation

English

Ninety-Day

Parts Only

Limited Warranty

On

Accessory(ies)

RETURN OF WARRANTY REGISTRATION

To register your product, please go to our web-site Jacuzzi.com, click on Bath and Showers, then select ONLINE 

WARRANTY REGISTRATION from the top of the page. You will then be prompted to enter your product Serial Number 

followed by your warranty registration information. Or you may also register by completing the registration below and 

mailing it to jacuzzi at the address provided below.
The attached Warranty Registration MUST be filled out by the purchaser within thirty (30) days from purchase and 

received by Jacuzzi Luxury Bath in order for this warranty to become effective.

RESPONSIBILITIES OF OTHERS

Inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of 

the User. They are responsible for ensuring the unit is free of defect or damage. Notices are placed on and in the unit 

and on the shipping carton advising the installer of this responsibility. In the event of a problem, the unit must not be 

installed. The Company is not responsible for failures or damage that could have been discovered, repaired, or avoided 

by proper inspection and testing (including proper water testing) prior to installation.
Damage occurring in transit is the responsibility of the carrier. The User or installer MUST open the crate and inspect 

the unit for damage when it is delivered. If damage is discovered, it must be reported immediately to the seller and the 

carrier in writing, and an inspection requested. Failure of the carrier to respond should be reported to the seller and the 

carrier. Your freight claims should be filed promptly thereafter.
Damage occurring to the unit during installation is the responsibility of the installer and/or building contractor and 

damage occurring thereafter is the responsibility of the user.
Failure of any optional equipment is the sole responsibility of the equipment manufacturer except as provided above 

and shall not extend to or apply to any replacement parts for the Options and Accessories. Any replacement parts shall 

be covered by the original equipment manufacturer.
The Distributor or Dealer is responsible for knowing local code requirements and notifying the installing contractor and/

or User of these requirements at the time of purchase. The Company is not responsible for costs to modify any product 

to obtain any code approval, such as city, county, or state building codes in U.S.A. or municipal or provincial codes in 

Canada.

WARRANTY SERVICE

For the customer's benefit, the Company maintains a list of independent service personnel to perform required warranty 

service repairs. Such firms are not agents or representatives of the Company and cannot bind the Company by words 

or conduct.
The Company will provide the warranty service described above when the following conditions have been met: the 

failure is of the nature or type covered by the warranty; the User has informed an Authorized Jacuzzi Luxury Bath 

Service Agent or Warranty Service Department Representative of the nature of the problem during the warranty period; 

conclusive evidence (e.g., proof of purchase or installation) is provided to the foregoing by the user proving that the 

failure occurred or was discovered within the warranty period; an authorized independent service person or Company 

representative has been permitted to inspect the unit during regular business hours within a reasonable time after the 

problem was reported by the User. In order to obtain warranty service, contact Jacuzzi Luxury Bath at:

 

jacuzzi.com 

or 

Warranty Service Department 

14525 Monte Vista Avenue  

Chino, California 91710 

Call: 1-(800) 288-4002

To obtain warranty replacement for factory-installed components for Company supplied options and accessories 

manufactured and supplied by the Company, call or write the above. Provide a description of the problem and proof 

of purchase. You will be instructed how to obtain replacements and where to return, at your expense, the failed 

component(s), option(s), or accessory(ies).
All replacement parts, equipment, and repairs shall assume the remaining warranty period of the part(s) replaced.

The Company's warranty obligation shall be discharged upon tender of replacement or repair. The customer's refusal to 

accept the tender terminates the Company's warranty obligation.

Summary of Contents for HE96000





























Reviews: