CONTROLS 6
en-20
6.2.2 PTO SWITCH _____________________________________________________________
The PTO switch is a 2-position knob type switch to engage and to disengage the cutting unit. The
PTO switch must be in the OFF (down) position to start the engine.
Pull on the red knob to move the switch to the ON position. When the PTO switch is in the ON
position, the cutting unit is engaged.
Always mow with the throttle lever in the fast position.
6.2.3 FUEL GAUGE _____________________________________________________________
The fuel gauge shows the hours of operation and the level of fuel.
The hour meter in the center of the gauge shows the hours of operation of the mower.
When the ignition switch is in the RUN position, the hour meter is active.
The fuel gauge is above the hour meter. The fuel gauge shows the level of fuel in the
tank. Do not allow the tank to become empty while you operate the mower.
6.2.4 THROTTLE LEVER_________________________________________________________
The throttle lever controls the engine speed. Always operate the mower at full throttle during
normal operation.
E
F
1/2
FUEL
