Jacobsen Ransomes HR 6010, Parts And Maintenance Manual

Page: 21 / 142

GB-19
JACOBSEN HR6010 Series: EB
SAFETY AND OPERATORS MANUAL
CUTTER DECK ADJUSTMENTS
7 CUTTER DECK ADJUSTMENTS
7.2 BLADE SHARPENING & REMOVAL
When required, the cutter blades may be sharpened
either by filing or grinding. It is essential that the
balance of the blades are maintained.
NOTE: Always replace blades with original Ran-
somes blades, do not use another manufacturers
blades.
– Service the blades with the tractor turned off,
and the decks securely supported.
– Do not overheat or weaken the blades.
– If blade becomes cracked or bent, replace with a
new blade to ensure safe operation
– f lift portion of blade is worn thin replace with a
new blade to ensure safe operation
– Place block of wood W between blade and deck
baffle to prevent blade from turning during
removal
– Keep hands clear of rotating blades
Removing Blades
1. Remove the nut N from the top of the blade
spindle bolt
2. Remove the blade spindle bolt with the washer
and blade.
3. Replace the blade, washer and blade spindle
bolt.