Jacobsen Ransomes HR 6010, Parts And Maintenance Manual

Page: 17 / 142

GB-15
JACOBSEN HR6010 Series: EB
SAFETY AND OPERATORS MANUAL
5 LUBRICATION AND MAINTENANCE
MAINTENANCE
bearing seals and cause premature bearing failure.
Storage
•
Store petrol or diesel fuel in an approved
container in a cool dry place.
• Keep the machine and fuel containers in a
locked storage place to prevent tampering
and to keep children from playing with
them.
• Do not store fuel or petrol/diesel fuel
powered equipment in any closed area
where heating appliances, pilot lights or
any sort of open flame is present.
• Before storing, allow the engine to cool,
and drain fuel completely from fuel tanks
and containers.
• Maximum safety and best mowing results
can only be expected if the mower is
maintained and operated properly.
5.7 MACHINE MAINTENANCE
Battery.
Keep fluid levels above battery plates.
Other Regular Service.
•
Verify proper operation of safety interlock
switches (Neutral switch, Seat switch,
etc.)
• Ensure nuts and bolts remain tight.
• Keep tyre pressure at 1kg/cm
2
(14psi).
• Follow the engine manufacturer’s
maintenance recommendations.
• If a label becomes worn or removed, see
the LABELS section of this manual or the
tractor Parts Manual for replacement
information.
NOTE: When washing machine with pressure spray
washers or steam cleaners, avoid washing bearing
areas because cleaning solutions might penetrate
Wear eye protection when servicing battery.
WARNING
Battery posts, terminals and related
accessories contain lead and lead
compounds.
WASH HANDS AFTER HANDLING
WARNING
Fig.12
5.6 ENGINE MAINTENANCE: Every 100 hrs
Cleaning the air filter.
To remove the cover, pull the yellow finger on the
cover towards you. Take hold of the cover firmly and
twist it to the left. Pull the cover towards you to
open the housing. Remove old filter gently , then
clean inside of the housing carefully.
Remove loose dirt from element with compressed air
working from the clean to dirty side, using
compressed air max 6 bar, with nozzle 5cm from
element. The element should be cleaned no more
than 6 times. In any case we recommend replacing
the main element once a year irrespective of how
many times it has been cleaned.
To close the cover reverse operation.
NOTE: Extensive damage to engine can result
from an inadequate air supply.