19
Completing Cab Installation
Install seat.
Install seat belt assembly on to the seat using the instruction sheet
provided with the belt. (Figure 25) Install seat pan assembly (Figure 3) using four
3/8” screws and corresponding hardware (R). Connect wire harnesses. Install
floorboard using four 7/16” truss head screws (P). Install heat shield to hydraulic
tank with three 5/16” screws, lockwashers, and washers (N).
Figure Twenty-five
Figure Three
——————————————————————————————————
Finishing tractor reassembly.
Cut out shaded areas of machine floor shield as
shown in Figure Twenty-six to provide clearance for rear mounting brackets.
Secure cab rear panel with two 1/4” X 1/2” flange bolts (41). Replace machine
floor shield. Tuck the front lip of the floor shield into the channel provided in the
rear surface of the cab rear access panel (42).Figure Twenty-six
Figure Twenty-seven
——————————————————————————————————
