12
Figure Eight
——————————————————————————————————
Install standard acoustic foam.
Remove the front casing of the steering tower.
Move the foam into position inside the tower (6). Once the foam is in place, peel
off the backing and secure it into place with the adhesive side.
Figure Nine
——————————————————————————————————
Install hydraulic tank.
Slide hydraulic tank back into position. Tighten front 1/2”
carriage bolt and hardware (X). Install and tighten rear 1/2” hardware (V). Lift rear
tank mount into position and secure to right rear mounting bracket and
crossframe with 3/4” hardware (Z). Torque nuts to 200-240 ft-lbs. Install rear and
tighten front 5/16” fender wall hardware (U). Reinstall fender with four 5/16”
crews and hardware (S). Install clamps securing 2” pump suction line.
