en-79
9 ADJUSTMENTS
9.11.3 BACKREST EXTENSION * ** _________________________________________
To adjust the backrest extension for each driver,
move the extension to the correct lock position.
To remove the backrest extension, move the
extension over the end stop.
* If
Installed
** Optional
Accessory
9.11.4 SEAT HEATER * ** _________________________________________________
Press the seat heater switch to turn the seat heater
on and to turn off.
0 = seat heater ‘OFF’
I = seat heater ‘ON’
* If
Installed
** Optional
Accessory
9.11.5 LUMBAR SUPPORT_________________________________________________
The lumbar support improves the quality of the seat
and increases the performance of the driver.
To adjust the curve in the upper part of the backrest
cushion, rotate the adjustment knob to the top.
To adjust the curve in the lower part of the backrest
cushion, rotate the adjustment knob to the bottom.
0 = No curve angle
1 = Maximum curve angle at the top
2 = Maximum curve angle at the bottom
Summary of Contents for Fairway 250 JGZZ250
Page 8: ...en 7 2 INTRODUCTION NOTES ...
Page 63: ...en 62 8 MAINTENANCE LUBRICATION 8 2 8 2 8 3 8 4 8 2 8 7 8 8 Fairway 250 Series JZ ...
Page 73: ...NOTES __________________________________________________________________ ...
Page 87: ...NOTES __________________________________________________________________ ...
