5 OPERATION
10
5
OPERATION
5.1 DAILY INSPECTION________________________________________________________
1.
Perform a visual inspection of the entire unit, look for
signs of wear, loose hardware, missing or damaged
components.
2.
Make sure the mower is adjusted to the required
cutting height.
3.
Make sure the machine is lubricated and the
transport tires are properly inflated.
4.
Check the O.P.C. system.
5.2
INTERLOCK SYSTEM (O.P.C.) _______________________________________________
1.
The Interlock System is intended to protect the oper-
ator and others from injury by stopping the reel and
drive mechanism as soon as the operator releases
the O.P.C. bail.
2.
To test the system, the mower must have the
transport wheels attached.
a.
Place mower on the kickstand.
b.
Place reel switch in OFF position.
3.
Start the unit and place throttle at mid-point.
a.
Push O.P.C. lock-out
(C)
forward then push
O.P.C. bail
(D)
down.
b.
The drive mechanism will engage and the
wheels will begin to turn.
c.
Release the O.P.C. bail. The bail must come up
and the wheels must stop.
4.
If the wheels begin to turn before the O.P.C. bail is
engaged or the wheels continue to turn after the
O.P.C. bail is released; shut off the power
immediately and have the system inspected and
repaired.
CAUTION
The daily inspection should be performed only with
the parking brake engaged, and power connector
disconnected.
!
WARNING
Never operate equipment with the Interlock
System disconnected or malfunctioning. Do not
disconnect or bypass any switch.
!
Summary of Contents for E-Walk 62290
Page 1: ...Technical Manual GB E Walk 62290 22 11 Blade Reel 4105380 Rev A...
Page 30: ...11 NOTES 30 11 NOTES...
Page 61: ...61 INDEX...
