6
TROUBLESHOOTING
22
6
TRO UBLESHOO TING
6.1
TRACTION CONTROL SYSTEM (TCS) _________________________________________
The Traction Control System (TCS) is designed to protect the electrical components of the traction and battery
systems. An error code is displayed when a fault condition occurs.
In most instances the traction controls on the tractor will cease to operate when an error condition occurs
.
In some cases resetting the TCS will allow the tractor to be restarted and operation resumed. If an error code continues
to occur after resetting the TCS, the tractor should be shut down and returned to a service area for inspection.
Error conditions caused by an electrical problem should be inspected and repaired by an experienced mechanic
familiar with the electrical system of this machine.
Code
Possible Cause
Action
-01
Attempting to operate tractor after getting up from
seat.
Reset Power Switch.
-02
1.
Forward pedal pressed while turning power on.
2.
Forward/reverse switch faulty or out of
adjustment.
Remove foot from pedals while starting.
Inspect and adjust switch.
-03
1.
Reverse pedal pressed while turning power on.
2.
Forward/reverse switch faulty or out of
adjustment.
Remove foot from pedals while starting.
Inspect and adjust switch.
-04
Parking brake not engaged while turning power on.
Engage parking brake before starting
- 06
Forward/reverse switch defective.
Return to maintenance area for service.
- 07
Accelerator input misadjusted or defective.
Return to maintenance area for service.
- 08
Accelerator input misadjusted or defective.
Return to maintenance area for service.
- 09
Forward/reverse switch defective.
Return to maintenance area for service.
- 15
Batteries discharged or defective.
Return machine to service area. Inspect condition
of batteries (Section 4.12). Replace or recharge.
- 16
1.
Batteries overcharged.
2.
Incorrect batteries used.
Return to maintenance area for service. Check that
maximum battery voltage is less than 57.6 VDC
- 23
1.
Motor field current high on start-up in the
reverse direction.
2.
Brakes adjusted too tight.
3.
Defective traction controller.
Return to maintenance area for service.
-24
1.
Motor field current high on start-up in the
forward direction.
2.
Brakes adjusted too tight.
3.
Defective traction controller.
Return to maintenance area for service.
Code
Possible Cause
Action
Summary of Contents for 88006 Sand Scorpion
Page 64: ......