OPERATION 6
21
6.5
TRANSPORT WHEELS (OPTIONAL KIT 62293) _________________________________
1.
Push and hold the kickstand against the ground then
pull the mower handle back until the mower rests on
the stand
(L)
.
2.
To remove wheels, press retaining clip
(J)
away
from the hub and pull wheel off hub.
3.
To install wheels, set brake, press retaining clip
(J)
,
place wheel on hub, and turn the wheel backwards
until studs on back of wheel line up with holes in
hub
(K)
. Push wheel in and release clip.
4.
Always disengage reel clutch lever
(E)
, prior to
transporting the mower more than a few feet.
5.
Push the mower forward off the kickstand, start the
engine, and engage the O.P.C. bail
(C)
.
6.
When using a vehicle to transport the mower, apply
parking brake, stop engine, and close fuel shut-off
valve. Chock or block the wheels.
7.
Keep tires inflated to 6 to 8 psi (0.41 to 0.55 BAR).
Figure 6D
6.6
GRASS CATCHER _________________________________________________________
1.
When the basket is about two thirds (2/3) full of grass
clippings, move mower off the green.
2.
Stop on a flat surface, disengage all drives, and
stop the engine.
3.
Remove and empty the grass catcher. Use a long
handle brush to remove grass clippings from the
mower.
WARNING
Always stop the engine and disengage the drive
levers before installing or removing the transport
wheels.
!
J
K
L
DANGER
To prevent serious injury, always stop the engine,
and disengage all drives before emptying grass
catcher.
!
Summary of Contents for 63286G01
Page 34: ...9 NOTES 34 9 NOTES...
Page 55: ...55 INDEX 503478 2 503479 2 503532 49 62293 53...