8
computer systems and up to a 24” LCD/LED Monitor. Not all computer systems and LCD/LED
Monitors will fit, and some may fit but require too much power draw to operate with the
optional LiFePO4 Battery System. Contact your local Sales Representative or call JACO Support
to review any question you may have.
To install your PC or Laptop, unlock both key-locks at the rear of the top assembly as shown in
the photo below. Once unlocked, the top work surface can be pulled forward and removed
from the Cart.
Once the work surface is removed, the open bay area (shown on left below) is available for
installing your computer or laptop. Route all cables needed for proper operation before
installing the work surface and locking in place for security. Shown below is an example of a
small PC properly installed with all cables routed neatly and organized. If using a laptop
computer, simply open, place the laptop on the internal tray and allow the display to protrude
through the opening in the work surface.
Additional tips for proper computer installation:
SFF and Thin Client:
insert inside the top bay so that the on/off power button is facing the side
Summary of Contents for EVO
Page 1: ...25 0215 Rev 01...
