10
If you are adding your own mouse and keyboard, they can be integrated as follows. It is important
that the wires are routed out of the way of the sliding keyboard tray. With each JACO Mobile Cart
we include an accessory pack that provides ty-wraps and Velcro pads along with other helpful items
for proper cable management. Use the Velcro pads to fasten the keyboard to the keyboard tray
and use the ty-wraps to secure the cables. The Keyboard & Mouse cables need to rout through the
access hole under the front top section of the Cart. Make sure you leave enough slack in the wires
to allow the tray to pivot up and down as needed. The Mouse can be placed on the Mouse Tray by
lifting the support wire up and slipping the mouse under.
Keyboard Light
All JACO EVO Carts are equipped with a Keyboard Light feature. For non-powered models the
included USB cable must be connected to a USB port on the laptop or computer that is installed into
the Cart. The on/off switch for this keyboard light will vary depending on other options ordered
but, in all configurations, will be found on the front status assembly. This will be either a slide
switch on the bottom or a button on the front surface that shows a light bulb icon.
Options
We offer many options for the JACO EVO Cart Series. Please contact your local Sales Representative
if you have any questions on existing options or have equipment that you need integrated onto the
Summary of Contents for EVO
Page 1: ...25 0215 Rev 01...
