OCTOBER 3, 2017
jaclo
industries
| 129 Dermody Street Cranford, NJ 07016
p
908.653.4433 | 800.852.3906
f
908.653.1717 | 800.852.4133
JACLO.COM
| PG 8
[STEP 3]
PLUMB ROUGH USING APPROPRIATE FITTINGS
Diverter and Thermostatic valve are factory sealed, do not separate!
1. Plumb hot and cold inlets on thermostatic body. Part #’s: J-TH34. J-TH12, J-TH34-686, J-TH34-688,
J-THVC12.
Figure 8
2. If using lower port on thermostatic body, a separate volume control is required. If not, port must be plugged.
Figure 8
3. Select diverter ports to be used. C, A, B and plumb with appropriate fittings. Part #’s: J-TH34-686,
J-TH34-688, J-20686 and J-20688.
(Note: Port A is not used with the 2-way diverter and must be capped)
Figure 8
Note: Two way diverter can be used as a single outlet and volume control by capping B or C port. Three
way diverter can be used as two way diverter by capping any single port or a volume control by capping
any two ports.
C Port
B Port
A Port
Cold
Inlet
Hot
Inlet
B
A
C
Extra Outlet requires
volume control or plug (not supplied)
"JACLO INDUSTRIES PROPRIETARY INFORMATION"
Dimensions are for reference only.
Jaclo reserves the right to change specifications without notice.
®
®
Thermostatic Body
Figure 8
