OCTOBER 3, 2017
jaclo
industries
| 129 Dermody Street Cranford, NJ 07016
p
908.653.4433 | 800.852.3906
f
908.653.1717 | 800.852.4133
JACLO.COM
| PG 3
[STEP 1]
ROUGH VALVE INSTALLATION
(J-THVC12)
1. Position valve assembly so outer edge of finished wall is between min./max. thickness marked on rough in
shield.
Figure 4
2. Using appropriate fasteners, mount valve assembly to studs/blocking.
Figure 3
3. Remove cartridge, check stops, and volume control.
Page 6
4. Connect inlet and outlet port piping.
5. See “Rough in plumbing and valve flushing”.
Page 9
6. Turn on water supply and flush valve with cartridge, check stops, and volume control removed.
Page 9
7. Turn off water supply and re-install cartridge, check stops, and volume control.
Page 10
8. Turn on water supply and test for leaks and all functions.
9. Twin Ell supplied and is only used for diverting tub spout.
10.
Continue on to
Page 11 & 12
5 3/4"
3 3/8"
Check Stop Access
2X
1/2" or 3/4" NPT
3 1/2"
Cold
Inlet
Hot
Inlet
All outlets require volume
control/diverter or plug (not supplied)
5 3/4"
3 3/8"
1/2" NPT
OUT
5 1/2" REF.
Cold
Inlet
Hot
Inlet
Check Stop Access
2X
INLET
1/2" NPS
3x
3 9/16"
3 9/16"
1 11/16"
Ø1/4"
2x
1 11/16"
B
A
C
C Port
B Port
A Port
5 3/4"
1/2" NPT
3x
3 3/8"
C Port
B Port
1 7/8"
2 5/16"
Check Stop Access
2X
A Port
3/4" 1/2"
Reducing
Bushing
3/4" NPT
3 5/8"
3 5/16"
Cold
Inlet
Hot
Inlet
B
A
C
Extra Outlet requires
volume control or plug (not supplied)
Mounting Holes
"JACLO INDUSTRIES PROPRIETARY INFORMATION"
Dimensions are for reference only.
Jaclo reserves the right to change specifications without notice.
®
®
Installation Example
Figure 3
Valve Rough-in Shield
Figure 4
Valve Rough Specs
TO SHOWERHEAD OR
OTHER PLUMBING
ASSEMBLY
1" THICK FINISHED
WALL OUTER EDGE
4½" Ø
Max
4½" DIA. MAX
HOLE IN WALL
SAMPLE HOLE IN WALL
TO TUB SPOUT ONLY
TWIN ELL SUPPLIED
