7
07610-004-29-29-A
INSTRUCTIONS
INSTALLATION
Take care not to confuse
static pressure with
flow pressure!
PLUMBING
CHECK
NOTE:
Ensure that you have read the section entitled “PLUMBING THE
DISHMACHINE” on the previous page before proceeding.
Install the water supply line (1/2” ID minimum) to the dishmachine line strainer using
copper pipe. It is recommended that a water shut-off valve be installed in the water
line between the main supply and the machine to allow access for service. For units
equipped with the Drain Quench Option, see the Drain Quench Assembly section of
this manual.
The water supply line is to be capable of 10 ± 2
pounds per square inch (PSI) “flow”
pressure at the recommended temperature indicated on the data plate.
The manufacturer recommends the installation of a water pressure regulator* in the
incoming water line of all DynaTemp models to ensure proper flowrate at all times and
offers these devices as options.
Do not confuse static pressure with flow pressure. Static pressure is the line pressure
in a “no flow” condition (all valves and services are closed). Flow pressure is the
pressure in the fill line when the fill valve is opened during the cycle.
The manufacturer also recommends the installation of a shock absorber* in the
incoming water line of all DynaTemp models and offers these devices as options.
This prevents line hammer/hydraulic shock—induced by the solenoid valve as it
operates—from causing damage to the equipment.
*See the Plumbing Options page and contact your dealer with any questions you
might have.
The steam machines come with lines to connect the source steam. Connect all steam
lines to the machine as all applicable codes provide. See machine data plate for
information concerning steam flow pressure.
1.
Slowly turn on the water supply to the machine after the incoming fill line and drain
line have been installed.
2. Check for any leaks and repair as required.
CAUTION:
All leaks must be repaired before placing the machine in operation.
WATER SUPPLY
CONNECTIONS
!
CAUTION
NOTICE
STEAM LINE
CONNECTION
i
i