07610-003-92-84-R
15
Operating
Range
Before operating the machine, verify the following:
1. The sump strainer and pan strainer are in place and clean.
2. The drain stopper is installed.
3. The wash/rinse arms (one on top and one on bottom) are installed and secure.
To place the
machine
in standby, flip OFF/ON/FILL switch to ON position.
PREPARATION
POWER UP
FILLING THE
WASH TUB
OPERATING INSTRUCTIONS
OPERATION
1. For the initial fill (installation or beginning of day), close the door and depress
and hold OFF/ON/FILL switch in FILL position for approximately 8–10 seconds.
2. Open the door and verify water level is correct. Water must be between the lines
on the drain stopper. For lowest energy use, water should be at the lowest line
on the drain stopper. This is only necessary during the initial fill. After this, the
water level is controlled by the timer.
If water level needs
adjusted, see
CAM Timer Operation
section and follow
instructions for CAM 5.
Lowest
Energy
Usage
Highest
Energy
Usage
Summary of Contents for CONSERVER XL-E
Page 57: ...07610 003 92 84 R 50 XL E LTH BOOSTER TANK PARTS 16...
Page 61: ...07610 003 92 84 R 54 SCHEMATICS XL E XL HH 115 V 60 HZ 1 PHASE...
Page 62: ...07610 003 92 84 R 55 SCHEMATICS XL E XL HH 208 V 60 HZ 1 PHASE...
Page 63: ...07610 003 92 84 R 56 SCHEMATICS XL E LTH 208 230 V 60 HZ 1 3 PHASE...
