background image

4

1.  Inspect the Pipe Stand before each use. Never use if any part of a Pipe Stand is bent, 

deformed or broken. Never modify or use a Pipe Stand that has been modified.

2.  Place the Pipe Stand on a smooth, level, firm surface that will support the weight of 

the load. Be sure all casters of the Pipe Stand are making contact with the floor.

3.  Always support the pipe with a minimum of two (2) Pipe Stands. Pipe size, weight and 

length are some of the factors to consider when supporting pipe with the Pipe Stands.

4.  Using the adjusting handle, adjust the V-heads of the Pipe Stands so they are the 

same height. ALWAYS adjust the V-head height prior to loading the pipe onto the Pipe 

Stands. Be sure all the casters are unlocked and pointing in the same direction before 

loading the pipe onto the Pipe Stands.

5.  Place the pipe onto the Pipe Stands. Never drop the pipe onto the Pipe Stands. Never 

exceed the maximum rated capacity of the Pipe Stands. Never allow anyone under the 

pipe while it is supported by the pipe stands.

6.  Each caster on the Pipe Stand has a locking brake. To engage the brake, push down 

on the brake lever. To unlock the brake, lift up on the brake lever.

 

 

NOTE: The V-head rollers have an oilite bearing and do not need regular lubrication.

OPERATING INSTRUCTIONS

SPECIFICATIONS

Model No.

636

636NC (No Casters)

Pipe Size Capacity

4" to 36" 

4" to 36"

Max. Weight Capacity

2500 lbs. per Pipe Stand

2500 lbs. per Pipe Stand

Overall Dimensions

W 35"  H 36

1

4

"

W 35"  H 28"

Weight

130 lbs.

90 lbs.

TO UNLOCK

TO LOCK

ITEM

QTY

DESCRIPTION

PART NUMBER

1

2

3

4

5

6

1

636-856 

BASE WELDMENT

1

636-855

TOP WELDMENT

5

CASTER

1

1

636-5

WASHER

5

SET SCREW-5/16-18 X 1/4" LONG

7

4

NUT-HEX, 3/8-16 (NYLON INSERT)

8

4

SCREW-SHOULDER 1/2" X 2-1/4" LONG

9

4

ROLLER

536-752

SPACER

636-846

636-4

2508-8

636-3

636-2

ITEM

QTY

DESCRIPTION

PART NUMBER

1

2

3

4

5

1

1

1

1

1

HANDLE NUT

HOLDDOWN WELDMENT

ACME SCREW

LINK-WRENCH CHAIN

CHAIN - 10 ft

636-858

EXPLODED VIEW

EXPLODED VIEW

ASSEMBLY INSTRUCTIONS

FEATURES

FRONT PAGE

CASTERS

1

2

3

4

5

SET SCREW

1

2

3

4

5

6

7

8

V-HEAD

ADJUSTING

HANDLE

QUICK

LOCK

BRAKE

STEEL

   ROLLERS

8" CASTERS

4

8

Summary of Contents for 636












Reviews: