10
HOLD DOWN DEVICE OPERATING INSTRUCTIONS
4. As you tighten the chain with the handle/nut,
check to ensure that a link of the chain
engages the chain retainer slot (See photo 5).
NOTE: If the chain does not tighten before
you run out of adjustment, loosen the
handle/nut and place the next link of
the chain into the hook on the hold
down bracket. Be sure the hold down
bracket and chain are in line with the
chain retainer to ensure the chain
remains tight. (See photos below).
ALWAYS use a hold down device with each pipe stand when transporting pipe.
5. Before transporting, align the casters as follows:
A. Unlock ALL caster brakes (See page 4).
B. Rotate the pipe stand base in a circular
motion to align casters.
NEVER use a hammer to
reposition the casters. Damage
could occur causing serious
injury or death.
6. Ready for transport. (See photo to right).
ALWAYS push or pull the load
from the end. DO NOT stand to
the side of the load while
transporting.
WARNING
DANGER
CAUTION
WARNING
DANGER
CAUTION
Right
Wrong
Photo 5
