DETAILS OF THE JP-24BPNSU DATA PLATE
2
MODEL:
SERIAL NO.:
60Hz 3 PH 3 WIRE
WASH MOTOR:
3/4 HP
1.6 AMPS
460 VOLT
180°F
150°F
120 SEC
20 PSI
MINIMUM WASH TEMPERATURE
MINIMUM RINSE TEMPERATURE
WASH CYCLE TIME
OPTIMUM FLOW PRESSURE
TOTAL LOAD:
11.0 AMPS
CONNECT TO MINIMUM 15 AMPERE SUPPLY-CIRCUIT
PROTECTED WITH MAXIMUM 15 A NON TIME-DELAY
TYPE FUSE OR OVERCURRENT PROTECTOR.
15 SEC
RINSE CYCLE TIME
RINSE HEATER:
7.5 KW
9.4 AMPS
140°F
INCOMING WATER TEMPERATURE
MANUFACTURER’S
LOGO
MODEL DESIGNATION
(I.E. JP-24BPNSU)
AMPERAGE LOAD
INFORMATION
MINIMUM OPERATING
PARAMETERS (SEE NOTE # 1)
ADDITIONAL SAFETY
INFORMATION
MANUFACTURER’S
ADDRESS INFORMATION
The data plate is located (standing before the unit) on the right front corner, directly on the shroud. Under no circum-
stance should the data plate be removed from the unit. The data plate is essential in identifying the particular charac-
teristics of your machine and is of great benefit to installers, operators, and maintenance personnel. It is recommend-
ed that, in the event the data plate is removed, that you copy down the essential information on the final page in this
manual for reference before installation. Do not use the above data plate to represent your dishmachine. The data
plate above is a generic representation used only to show you where to locate information.