6
Screw the portable regulator
into the side of the control box.
Do not over tighten.
PREPARING YOUR GRILL FOR OPERATION
STEP 1:
Make sure a battery (supplied) is installed in the ignition module. To do so, unscrew the black igniter button
by turning it counter clockwise. The igniter only works if the battery is installed in the correct direction.
STEP 2:
Decide what fuel system you are going to be using the grill with. For single-use 1 lb liquid propane (LP)
cylinders, install the LP portable regulator onto the side of the grill as shown:
For use with a larger propane cylinder or Natural Gas connection, use the following instructions to install the
Multi Purpose Valve system. Make sure the correct orifice is installed on the Multi Purpose Valve system prior
to final installation.
TO INSTALL MULTI PURPOSE VALVE SYSTEM
