Jack JK-T5878-58G, Instruction Manual, Page: 8 / 70

5
3.
线架的安装
ASSEMBLING THE THREAD STAND AND ATTACHING IT
请按照左图所示那样，将线架插到主机机架上的圆孔中，调整
好位置以后，用两个内六角紧定螺钉固定。
Putting the thread stand in one of the two holes o n main unit frame
and fix the thread stand with two hexagon without a head set screws as
illustrated in the left-hand figure.
4.
夹杆堆叠器的安装
(
选购品
)
INSTALLING CLAMP BAR STACKER (OPTIONAL)
1)
拆开包裹堆叠器的塑料，剪断扎带，然后松开
固定堆叠器的螺钉。
2)
调整堆叠器位置。
3)
按照如图
○
1
、
○
2
所示，固定好堆叠器。
1)
Remove the string and packing materials that have
fixed the stacker,and then remove the screw.
2)
Adjust the stack position.
3)
As shown in the fig
○
1
、
○
2 ,lock the whole
stacker with.screw and plate.
Clamp bar stacker is delivered in the state
that it is fixed in the frame at the time of
delivery with the clamp bar stacker
mounted.It is necessary to change the
installing position to the normal using
position
此时，请确认空气是否进入到里面。
此时，请注意不要夹到堆叠器电线和空气配
管等。
安装了夹杆堆叠器出货时，是固定到机架内
的状态出货的，因此必须变更安装到通常的
使用位置。
At this time, take care to prevent the
stacker cord, the air piping, etc. from being
caught.
At this time,confirm that air is being supplied.