Jack JK-T1790, Manual

Page: 71 / 185

- 64 -
8 绕底线
WINDING BOBBIN THREAD
安装梭芯
Set the bobbin.
把梭芯插进卷线轴。然后，请朝箭头方向按梭芯导向
器。
Fit a bobbin fully onto the bobbin winder shaft. Then push the bobbin
thread guide in the direction of thearrow mark.
显示底线卷线画面
Display the bobbin winding screen.
在数据输入画面或缝制画面上，
按了卷绕按键
A
之后，卷线画
面被显示出来。
Press BOBBIN WINDER button (A)
in the data input screen or the
sewing screen and the bobbin
winding screen is displayed.
开始卷线
Start bobbin winding.
踩踏启动踏板之后，缝纫机转动，开始卷绕底线。
Depress the start pedal, and the sewing machine rotates
and starts winding bobbin thread.
停止缝纫机
Stop the sewing machine.
按了停止按键
A
之后，缝纫机停止转动，返回通常模式。另外，在卷绕底线中，再次踩踏踏板之后，缝
纫机在卷线模式下停止缝纫机，因此再次踩踏起动踏板，可以继续卷绕底线，在卷绕数个梭芯时可以利用此功能。
Press STOP button A and the sewing machine stops and returns to the normal mode. Or, depress the start pedal
twice during winding bobbin and the sewing machine stops while the bobbin thread winding mode stays as it is.
Depress the start pedal again and the bobbin winding starts again. Use this way when winding bobbin thread around
plural bobbins.
A
A
A