Jack JK-T1790, Manual

Page: 55 / 185

- 48 -
NO.
项目
Item
设定范围
Setting range
编辑单位
Edit unit
备考
Remarks
S19
放射形状针数
Number of stitches of radial shape
设定放射形状的上部
90
度中的缝制条数。
This item sets number of stitches in the upper 90 ﾟ of radial shape.
1
～
8 1 ---
S20
放射形状加固
Reinforcement of radial shape
设定有
/
无放射形状的加固。
This item sets with / without reinforcement stitching
of radial shape.
：有 With ：无 Without
--- --- ---
S21
加固部间距
Pitch at bar-tacking section
设定加固部的缝制间距。
This item sets sewing pitch of
bar-tacking section.
方型上 圆型上 半圆上
方型下 圆型下 半圆下
直线加固下 锥形下
Square type, top Round type, top Semilunar, top
Square type, bottom Round type, bottom Semi-lunar,
bottom Straight bar-tack, bottom Flow, bottom
0.200
～
2.500
0.025mm ---
S22
第
1
间隙
1st clearance
设定第
1
加固和切刀槽间的间隙。适用于全形状。
This item sets the clearance between 1
st
bar-tacking and knife groove.
This item is applied to all shapes.
0.0
～
4.0 0.1mm ---
S23
第
2
间隙
2nd clearance
设定第
2
加固和切刀槽间的间隙。适用于全形状。
This item sets the clearance between 2
nd
bar-tacking and knife
groove. This item is applied to all shapes.
0.0
～
4.0 0.1mm ---
S31
单缝制
/
双重缝制
Single/double stitching
选择单缝制，双重缝制。
This item selects single or double stitching.
：单缝制 Single stitching ：双重缝制 Double stitching
--- --- ---