8
ASSEMBLY
(CONT .)
STEP 5:
Place lid with pulp guard attached on top
of receptacle, making certain it is snugly
aligned with the pulp guard facing in the
opposite direction of the juice spout.
Lock lid into place by lifting locking bar
up until it clicks into grooves located
on both sides of the lid. Make sure
locking bar is in the full upright,
locked position.
IMPORTANT:
The unit will not start
until this bar is properly locked in place.
STEP 6:
Insert pusher into chute.
Always use pusher to feed fruits
and vegetables into unit. Push gently,
never force. The blade will do the work.
6
Pusher
Chute
Lid with
Pulp Guard
Receptacle
5
Lid with
Pulp Guard
Pulp
Collector
7
STEP 7:
Make sure juice spout is in the
downward position. If the juice spout is
left in the upright position the juice will
not flow. It will stay in the receptacle
and may overflow from the sides.
DOWNWARD POSITION
UPRIGHT POSITION
