6
DISASSEMBLY
IMPORTANT:
Before disassembling the unit
make sure you turn the power OFF and unplug
the machine from the electrical outlet.
Pulp
Collector
Locking Bar
2
Lid with
Pulp Guard
STEP 1:
Remove pusher from the chute.
STEP 2:
Lower the locking bar (silver) into
position as shown.
Base
1
Pulp Guard
Pusher
STEP 3:
Remove lid with pulp guard, and pulp
collector.
STEP 4:
Use the black crescent tool to remove
the blade. Place the two pegs at either
end of the crescent tool into the two
holes on the blade, press down and turn
counter-clockwise to unlock the blade.
Remove blade carefully.
3
6
STEP 5:
Remove filter.
STEP 6:
Make sure spout is in the upright
position to avoid leakage. Remove
receptacle from base.
5
Crescent Tool
Blade
4
Filter
Receptacle
